Autonomous truck loading and unloading

TRAPO closes safety gap between warehouse and loading bay

Autonomous truck loading and unloading: By dispensing with forklifts in the warehouse and loading area, TRAPO GmbH defuses this danger zone and realizes the handling of goods with the TRAPO Loading System (TLS 3600) in terms of effective overall logistics safely and with short distances.

The compact, autonomous TRAPO loading system is unique in terms of function and design. The TLS 3600 gets its name from a special feature: It loads three pallets of 1,200 kg each, i.e. 3,600 kg, in parallel in a single operation.

Autonomous loading takes place in three central steps. First, up to three pallets are placed next to each other in a row on conveying technology (step 1) and aligned. This is followed by picking up (step 2) and loading of the row (step 3). During the loading process, another row of pallets is formed and provided on the stationary part. A continuous process that saves time and distance and avoids waiting times during pallet loading.

Unloading takes place in reverse order.

Advantages

  • Safety at the loading bay – no need for forklift trucks
  • Fully automated for truck loading and unloading / for any industry
  • Autonomous regulation of the position before and during truck entry
  • Reduction of loading time up to 30 minutes
    (depending on the load/14-meter trailer with 33 pallets pick-up)
  • Closes safety gap between warehouse and loading bay

In the waiting position the row is provided

3 pallets each are positioned next to each other in a row

Loading into the truck

Perfect cooperation: vehicle plus dock

The TLS 3600 is always the right choice due to its flexibility. Two individual mobiles together allow any combination possibilities: The TLS series basically consists of the autonomously operating vehicle plus dock.

The dock is available both as a fixed and as a mobile version. The fixed version serves only one loading hatch. In the mobile version, the dock is positioned in front of up to three loading ramps, one after the other, by wheel or rail, in order to load precisely at the respective lift. For the rail-bound variant, it must be clarified whether structural changes to the hall floor are possible and desired.

For the vehicle, a choice can be made between a cable-connected or battery-powered version.

Depending on the customer’s requirements, this results in a wide range of possible applications and thus the optimum solution:

From the warehouse into the truck – can’t any competitor do that?

Not in this patented form! Up to now, there have mainly been one-shot systems. Here, the entire load for a truck is prepared in the loading zone and loaded in one go. This often requires a structural change in the truck as well. Above all, however, a lot of space is unnecessarily blocked by this parking space, which is about 20 meters long, in what is already a tight area.

Honored with the Handling Award

Handling Award TRAPO

Technical details

  • TLS 3600 (3,6t payload)

Permanently installed

Movable on rails

Wheel driven movable

Performance:
Maximum capacity per loading operation: three pallets of 1,200 kg each.

Length:
4.40m including tines

Width:
TLS: 2.15m

Stroke:
1,60 m

Height:
1.35 m (lift mast retracted)

Ramp height
Loading ramp inclination 4

Load:
per loading operation: three pallets of 1,200 kg each, total 3,600 kg

Weight:
Unloaded 5.5 t,

Driving autonomously: laser scanner for contour detection on the loading unit; distance sensors for position detection; rear-wheel steering in the vehicle

Loading time:
Reduction to up to 25 minutes (depending on the load/for a 14-meter trailer holding 33 pallets).

Power supply:

TLS cable-connected or with rechargeable battery

Delivery of Euro pallets either by shuttle fleet or rigid conveyor system

No structural modifications to the trailer necessary

Required area for autonomous loading and unloading in the loading zone:

Approx. 14.00 m total length, including 3.00 m shunting distance

Contact us!

Subscribe to newsletter